|
|
Imaging Plates
|
BAS-SR2040
BAS-SR2025 |
|
Size: |
20 x 40cm
20 x 25cm |
|
|
BAS-MS2025
BAS-MS2040
BAS-MS2325
BAS-MS2340
BAS-MS3543 |
|
Size: |
20 x 25cm
20 x 40cm
23 x 25cm
23 x 40cm
35 x 43cm |
|
|
BAS-ND2040
BAS-ND2025 |
|
Size: |
20 x 40cm
20 x 25cm
|
|
|
IP Cassette |
|
Size: |
20 x 40cm
20 x 25cm
23 x 40cm
23 x 25cm
40 x 43cm |
|
FLA-3000 Accessories
|
Fluor Stage
For capturing fluorescent or chemifluorescent images.
Size: 23 x 40cm |
|
Multi Stage
For detecting fluorescence in 20 x 40cm glass plate for DD method or in microtiter plates (MP-plug in)
Size: 23 x 40cm |
|
Imaging Plate
BAS-MS2325
BAS-MS2340
BAS-MS2025
BAS-MS2040 |
|
IP Stage
For capturing images. Exposed IP attaches to the magnetic stage using a soft-ferrite backed surface.
size: 23 x 40cm |
|
IP Cassette 2340
Used when IP is exposed to RI-labeled sample. |
|
Size: |
20 x 25cm
20 x 40cm
23 x 25cm
23 x 40cm |
|
|
Imaging Plate
In addition to BAS-MS IPs,BAS-SR2025/2040, BAS-TR2025/2040 and BAS-ND2025/2040 are also available. |
FLA-5100 Accessories
 |
| Top to Bottom: FLUOR Stage, IP Stage, MULTI Stage |
|
Fluor Stage
(With optional gel stopper)
A glass plate of 40x46cm can be used for fluorescence detection, digitizing function and chemiluminescence detection.
IP Stage
A magnetic stage holds the IP with a soft ferrite layer of any size up 40x46cm.
Multi Stage
(With optional microtiter plate holder that can hold up to six microtiter plates)
Large size polyacrylamide gel plate can be measured with the glass. |
|
BAS-MS 3543
High sensitivity and waterproof MS type IP appeared in 350x430mm size. Corresponding IP cassette is 400x430mm in size, and is the size that two 200x400mm IP can be exposed simultaneously. |
FLA-8000 Accessories
|
Slide Carrier
Up to 5 glass slides can be set. Allowance for the size of the slide is very widely designed. Focusing of the optics is set on the surface of the glass slide. By setting the software at Slide mode, 5 slides can be imaged for the entire wavelength equipped in the FLA-8000 by one click. |
|
Gel Carrier
Up to 2 mini-gels (51x59mm) can be set. For example, agarose gel for checking the PCR products before hybridization can be applied. Focusing of the optics is set at 1 mm above the glass platen. By setting the software to Gel mode, 2 gels can be imaged at 100 um pixel size. |
|
IP Carrier
A special size (85x127mm) imaging plate was prepared for FLA-8000, namely BAS-SR0813. IP carrier is a magnetic plate to stick the IP, which has soft ferrite layer. As the sensitivity of FLA-8000 is designed to be higher at Green-Red regions, the blue (390nm) photo-stimulated luminescence of IP detection is lower than other FLA systems or BAS systems. |
|
|